View W796_4898585.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

L U M IN I S
Bollard mount
Specification
ECLIPSE
W793 . W795 . W796
12 3 4 5 6 7
9
All exposed cast aluminum components are made of non corrosive pure aluminum copper free (Aluminum is less than .1% copper content.#356 alloy.) The luminaire base assembly is built with a hinge mechanism,allowing to tilt the top part of the luminaire to access the electrical equipment. No tools required. The quick disconnect ballast assembly is installed on a removable tray. The lamp is accessible with a twist and lock action. The ease of maintenance and lamp replacement concept will leave the optical chamber free of finger prints and foreign particles, Finish: All polyester powder baked coatings preceded with a 5 baths preparation process. Meets military grade MIL-C781706 with a 2000 hours salt spray test. - Pulse rated porcelain socket. - One-piece molded silicone gasket with memory retention. - High power factor CWA ballast for H.I.D.or 98% P.F. - All stainless steel hardware. - All Moving and removable parts are sealed with a memory retention silicone gasket. Min. 3/16" thick cast aluminum top cover. W795: Set of three 1/4" thick interlocked cast aluminum blades. Clear acrylic U.V. protected high impact cylinder. 1/2" dia. solid aluminum struts. Type V light distribution borosilicate refractor. Cast Aluminum swing out housing,with safety cable retainer. Push release button for quick access to electrical equipment Safety lock hexagonal side set screw for restricted access. (Except for safety lock,no tools required for maintenance.) 7- Cast Aluminum ballast housing with dissipation fins to maximize heat dissipation and cool operation of ballast. 8- 8" dia.extruded aluminum bollard stand. 9- W796: 18" dia.field adjustable min. 3/16" thick cast aluminum shade. Adjustability will contribute to control brightness with various viewing angles. 123456-
8
W793
W795
W796
luminaire tilt action.
12 "
18" Access to lamp Access Ballast 42"
14"
Photometry
Separate updated technical specification sheets with related models and light sources with I.E.S formatted photometry are available on www.luminis.com.
Certification
UL. Wet Location.
Mounting.
Set of three 1/2" -13 x 12" lg. galvanized anchor bolts.
For options details and specifications, please refer to pages 41.42.43
Model#
s lock shade. nly. d
Light source selection
MH (ED17) M50 M70 M100
Voltage
120 V Standard factory prewired (If no voltage is specified) For other voltages, please specify with catalog number. H.I.D. 208 V 240 V 277 V 347 V
Finish
(Refer to color chart) Standard selection WHT:Snow white BKT: Jet black BZT: Bronze GRT: Titanium gray DGT: Gun metal CHT: Champagne MST: Matte silver GNT: Forest green Optional colors CS: Custom color RAL: RAL# color H1: PR7: FS: PH1: PH2:
Options
Accessories House shield. Pier mount. Electrical Fuse 120/277V photo cell 347V photo cell
W793 W795 W796
HPS (ED17) e l o cell ll H50 H70 H100
Mounting
Bolt circle dia. 6" 8" dia. base plate
(Lamps by others)
Luminaires may be altered for design improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5
Tel: 954 .717 .4155 Fax: 954 . 717.4157 Toll free: 888 .401 .6999
Web: www.luminis.com
Sept. 2006 Rev. Feb.2007
Page 39
L U M IN I S
Push Release button lock Option: LB1
General notes: Please specify selected option as a suffix to luminaire model number. ex: W614-M100-WHT-LB1 Each model is provided with a listing of compatible options. Some options may not be compatible when used in the same luminaire. Please check listings.
OPTIONAL ACCESSORIES
ECLIPSE
Option: SW45
45 hang straight ball swivel for 5/8" dia. suspension stem.
House side shield Option: H2 For post top
luminaires H1 For bollard mount luminaires. Exterior white enamel, and specular aluminum inner reflective surface. The shield is inserted and snaps inside the diffuser. 360 on site rotation.
Slope ceiling adaptor
Reflector disc Option: OS
For restricted access. Locked push button. Requires 8-32 hexagonal key to release. Aluminum oblong reflector disc. (Factory installed) Applicable to W632 & W640
18" Dia.
Suspension safety cable Option: STC
Additional safety cable, extended 12" beyond canopy
13 1/4"
Adjustable down light (W780 series) Option: DL4
50W / MR16 adjustable down light Available with 120V power input. For other voltages, please consult factory Note:Other down light sources than shown with option DL4 are available. Please consult factory.
Type III reflector Option: RF3 / RA3 / RL3 / PR3
Type III Multifaceted specular reflector. (Single lamp only.)
Suspension stem
5/8" O.D. suspension stem. STM60 60" lg. STM80 80" lg. For other factory cut to size length add suffix -STM with desired length to catalog# max.120"
Light distribution control
Option: Type III light distribution R3 refractor Option: Type IV light distribution R4 refractor
Semi frosted diffuser Option: LF1
Type IV reflector Option: RF4 / RA4 / RL4
Type IV Forward throw aluminum specular reflector.(Single lamp only.)
Lamps & ballast compatibility Compact Fluorescent
Lamp Watts Lamp base
Wall mount light options Option: DL1 DL1-277
Fuse
Frosted lower portion of diffuser.
Option
FS Ballast protection fuse Available with H.I.D. luminaires only
12V/50W MR16 Down light with integral 120/12V or 277/12V electronic transformer. other input voltages on request.
Note: FS option fuse is factory calibrated and installed with selected wattage. Post mount luminaires: FS installed with pole.
26W 32W 42W 57W 70W 85W 120W
G24Xq3 G24Xq3 G24Xq4 G24Xq5 G24Xq6 2G8-1 2G8-1
Metal halide
Lamp Watts Lamp base ANSI Code
Option: DL2
Open sealed top cover allowing uplighting
Emergency battery pack
For 57w & 70w: Consult factory
All other types: FS is installed with luminaire.
Option: DLC
DL1 / DL2 Combination.
EM42
One lamp: 26w: 450 Lmns.. 32w: 575 Lmns. 42w: 750 Lmns. Time: 90 Mnts -120/277V T 0 C Please refer to page 72 for more details Quartz restrike standby lamp kit. When power failure is restored, it will energize temporary Quartz lamp with progressive dimming until full H.I.D light output is produced. max.100w DC bayonet type. (Lamp is not included.) Not Applicable with CFL lamps.
Light photo sensor Option: PH1 -120V
PH2 - 277 / 347V Photo electric sensor, factory installed with the pole or inside fixture when pole is not required.
39W 50W 70W 70W 100W 150W 150W 175W
T6/G12 ED17 ED17 T6/G12 ED17 ED17 T6/G12 ED17
M130 M110/M148 M198/M143 M139 M90/M140 M102/M142 M142 M57
Quartz lamp restrike Option: QRS
Quartz lamp restrike Quartz lamp socket for external 120V Option: QS
emergency power input. Separate 120V dedicated wiring is included. max.100 W DC bayonet type. (Lamp is not included.) Not Applicable with CFL lamps.
Luminaires may be altered for design improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 Tel: 954 .717 .4155 Fax: 954 . 717.4157 LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Toll free: 888 .401 .6999
Web: www.luminis.com
Sept. 2006 Rev. Feb.2007
Page 41
L U M I N IS
4 1/2"
OPTIONAL MOUNTING AND ACCESSORIES
ECLIPSE
17 3/4"
ACW1 series
Mounting Power Power
17 3/4" 10" 4 5/8" 27" 28" 3" 4 5/8"
EC3W EC3WS
series Mounting
3"
ACA1
Pole mount EPA:0.7
ACW1
Wall mount
6 1/8
ACA1/ ACW1 -1" x 3" extruded aluminum side pole or wall mounting adaptor. 1/2" dia. stainless steel rod support. 10" x 4" o.dia. aluminum tenon.
11 1/2" 6 3/8" 6 1/8" 6 1/8" 16" 16" 10 1/2" 18 3/8" 7 1/4" 17 3/8"
Power
Power
Power
Power
EC3PS -1" x 3" extruded
aluminum twin short arm side pole mounting adaptor designed to fit with 4 to 5" dia. poles. 16" lg. X4" o.d. tenon. This option is applicable only to catalog numbers with the suffix LS EPA:0.72
EC3WS -1" x 3" extruded
aluminum twin short arm mounting adaptor designed for wall installation, with a set of two cast aluminum mounting plates. This option is applicable only to catalog numbers with the suffix LS
EC3P -1" x 3" extruded
aluminum twin extended arm side pole mounting adaptor designed to fit with 4 to 5" dia. poles. 16" lg. X4" o.d. tenon. EPA:0.97
EC3W -1" x 3" extruded aluminum
twin extended arm mounting adaptor designed for wall installation, with a set of two cast aluminum mounting plates.
Please specify selected option with a suffix to the specified model number. Ex: W624LS-EC3WS-EC5 M100-WHT
23/30"dia. aluminum double adjustable dropped shade
30" 23"
30"dia. aluminum single adjustable dropped shade
30"
18" dia. cast aluminum adjustable shade
18" 2 1/2" 3 1/2"
Pier or short wall top mount
Short bollard stand. Compatible with all bollard luminaires. 25" Add. PR7 as suffix to the selected bollard model.
2 1/2" 2 1/2" 2 1/2"
Set of two .093" thick hard aluminum shades factory prefixed. The underside is standard white enamel to optimize lighting performance. The set of shades can slide along the diffuser to accommodate various landscape viewing angles. Note: The distance between the two shades is fixed.
.093" thick hard aluminum factory prefixed dropped shade. The underside is standard white enamel to optimize lighting performance. The shade can slide along the diffuser to accommodate various landscape viewing angles.
Option: EC6 EPA:0.44
Compatible with: ACA1 EC3P ACW1 EC3W
Option: EC7 EPA:0.25
Compatible with: ACA1 EC3P ACW1 EC3W
(3) 5/8" dia. 3/16" thick cast aluminum shade 8" dia. mounting holes for applications where heavy @ 120 traffic requires indestructible 6" dia. materials. The underside is standard white enamel to optimize lighting performance. The shade can slide along the diffuser to 2" dia.power entry. accommodate various landscape viewing angles. Option: EC5 EPA:0.26 Option: PR7 Compatible with: ACA1 EC3P EC3PS Compatible with: ACW1 EC3W EC3WS W788 TO W791 Bollard series.
Luminaires may be altered for design improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5
Tel: 954 .717 .4155 Fax: 954 . 717.4157 Toll free: 888 .401 .6999
Web: www.luminis.com
Sept. 2006 Rev. Feb.2007
Page 42
L U M IN I S
OPTIONAL MOUNTING AND ACCESSORIES
Wall mount
10 1/2"
ECLIPSE
22" 16" 11 1/2"
Pole mount
4 1/2"
16"
16"
W614LS
W616LS
W618LS
28" ACW1 Wall mount EC3WS Wall mount short.arm ACA1 Pole mount EC3PS Pole mount short arm.
W624LS
1
W722LS Wall mount Pole mount
16"
W606
W616
W614
W618
W768 W770
ACW1 Wall mount 17 1/2"
18 1/2" EC3P Wall mount extended.
W624
W708
W712
W722
W766
16"
EC3W Wall mount extended. * Note: 36" extension with ACA attachment 24" extension with EC3P attachment OAL pole height 12-14 or 16ft. Post top mount
ACA1 Pole mount
Compatible poles listing.
Post top mounting
Mounting style 4"O.D. PAA410 PAA412 PAA414 PAA416 PAA418 PAA420 PAA410-C3P PAA412-C3P PAA414-C3P PAA416-C3P PAA418-C3P PAA420-C3P PAA414-ACA PAA416-ACA PAA418-ACA PAA420-ACA 5"O.D. PAA510-A PAA512-A PAA514-A PAA516-A PAA518-A PAA520-A PAA510-C3P PAA512-C3P PAA514-C3P PAA516-C3P PAA518-C3P PAA520-C3P PAA514-ACA PAA516-ACA PAA518-ACA PAA520-ACA 4"O.D. PCA10 PCA12 PCA14 PCA16 4"O.D. PEX10 PEX12 PEX14 PEX16 PEX18 PEX20 4"O.D. PXD10 PXD12 PXD14 PXD16 PXD18 PXD20 Pole height 10 ft 12 ft 14 ft 16 ft 18 ft 20 ft 10 ft 12 ft 14 ft 16 ft 18 ft 20 ft 14 ft 16 ft 18 ft 20 ft
* Note
4" PEX pole style PXD pole style PCA pole style PCA pole style PAA pole style
Post side mount with EC3P attachment accessory
PCA12-C3P PCA14-C3P PCA16-C3P PEX12-C3P PEX14-C3P PEX16-C3P PEX18-C3P PXD12-C3P PXD14-C3P PXD16-C3P PXD18-C3P
Post side mount with ACA1 attachment accessory 60"
PCA14-ACA PXD14-ACA PCA16-ACA PXD16-ACA PXD18-ACA PXD20-ACA
For poles details and specification, please refer to pages 140 to 144 Luminaires may be altered for design improvements or discontinued without prior notice. Tel: 954 .717 .4155 Fax: 954 . 717.4157 Toll free: 888 .401 .6999
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5
Web: www.luminis.com
Sept. 2006 Rev. Feb.2007
Page 43

▲Up To Search▲

Price & Availability of W796

	To Download W796 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .